Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung PDF herunterladen (Seite 78)

CONFIGURATION

The configuration file name is from parameter Base URL, hardware MAC address of ETH0

interface and cfg extension. Hardware MAC address and cfg extension is connected

automatically and it isn’t needed to enter this. By parameter Unit ID enabled it defines

the concrete configuration name which will be download to the router. When using parameter

Unit ID, hardware MAC address in configuration name will not be used.

Automatic configuration update starts 5 minutes after turning on the router and then

every 24 hours or it is possible to set the time of automatic configuration in parameter Update

Hour. If the entered URL is different configuration than in the router then the router

downloads this configuration and restarts itself.

The changes in settings will apply after pressing the Apply button.

6.26. Change profile

To open the dialog box for changing profile select the Change Profile menu item.

Profile switch is making by press the button Apply. Change take effect after restarting router

by the help of button Reboot in web administration or by SMS message. It is possible select

the standard profile or up to three alternative profiles. It is possible to copy actual

configuration to selected configuration by selecting Copy settings from current profile

to selected profile.

6.27. Change password

To open the dialog box for changing the access password select the Change Password

menu item. The new password will be saved after pressing the Apply button.

In basic settings of the router the password is set on default form root. For higher

security of your network we recommend changing this password.

LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 100 101

Keine Kommentare

Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung Seite 78