Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung PDF herunterladen (Seite 59)

CONFIGURATION

The tunnels are active after selecting Create x GRE tunnel. In the singles window it

is possible to define the IP address of the remote side of the tunnel (Remote External IP

Address), internal IP address of the local side of the tunnel (Local Internal IP Address),

internal IP address of the remote side of the tunnel (Remote Internal IP Address), address

of the network behind the remote side of the tunnel (Remote Subnet) and the mask

of the network behind the remote side of the tunnel (Remote Subnet Mask). The GRE tunnel

is used for connection of two networks to one that appears as one homogenous. Last item

(“Pre-shared Key”) defines 32b number that identifies shared key of tunnel. This code must

be on both sides of same, differently router drops packets.

Attention, GRE tunnel doesn’t connect itself via NAT.

The changes in settings will apply after pressing the Apply button.

Example of the GRE Tunnel configuration:

GRE tunnel Configuration:

A B

Remote External IP Address: 10.0.0.2 10.0.0.1

Remote Subnet: 192.168.2.0 192.168.1.0

Remote Subnet Mask: 255.255.255.0 255.255.255.0

192.168.1.4

192.168.1.3

192.168.1.2

192.168.2.2

192.168.2.3

192.168.2.4

ppp0 10.0.0.1

ppp0 10.0.0.2

GRE tunel

Default Gateway 192.168.1.1

Default Gateway 192.168.2.1

192.168.1.1

192.168.2.1

LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 100 101

Keine Kommentare

Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung Seite 59