Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung PDF herunterladen (Seite 63)

CONFIGURATION

6.17. NTP Client Configuration

NTP client Configuration can be called up by option NTP item in the menu.

In the window can be defined the address prime (Primary NTP server Address)

and econdary NTP server (Secondary NTP server Address), by the help of which the router,

after first interface to the GPRS from make power supply, will adjust the inner clock. Example

of NTP server address can be seenon ntp.isc.org/bin/view/Servers/StratumOneTimeServers.

By parameter Timezone it is possible to set the time zone of the router. By parameter

Daylight Saving Time is possible to define time shift.

By parameter Enable local NTP service it is possible to set the router in mode, that it

can serve as NTP server for other devices.

The changes in settings will apply after pressing the Apply button.

Example of the NTP configuration with set primary and secondary NTP server

and with daylight saving time:

6.18. SNMP Configuration

To enter the SNMP Configuration it is possible with SNMP agent ver.1 configuration

which sends information about the router, eventually about the status of the expansion port

CNT or M-BUSD.

The Community item defines the password for access to the SNMP agent. Item

Contact identifies a person who manages the router together with information how to contact

this person, item Name is the designation of the router and item Location describes

the physical placing of the router.

By choosing Enable I/O extension it is possible to monitor binary inputs I/O

on the router, by choosing Enable XC-CNT extension it is possible to monitor the expansion

port CNT inputs status or by choosing Enable M-BUS extension and enter the Baudrate,

Parity and Stop Bits it is possible to monitor the meter status connected to the expansion port

LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 100 101

Keine Kommentare

Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung Seite 63