28
6 Set up with the display and adjustment module PLICSCOM
VEGABAR 52 • Probus PA
36719-EN-130321
– Save value
•
[->] key to select:
– Menu change
– Select list entry
– Select editing position
•
[+] key:
– Change value of the parameter
•
[ESC] key:
– interrupt input
– Jump to next higher menu
The sensor is adjusted via the four keys of the display and adjust-
ment module. The LC display indicates the individual menu items. The
functions of the individual keys are shown in the above illustration.
Approx. 10 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not conrmed
with [OK] will not be saved.
6.4 Menu schematic
Information:
Depending on the version and application, the highlighted menu
windows may not always be available.
Basic adjustment
▶
Basic adjustment 1
Display
Diagnostics
Service
Info
Sensor address 1.1
126
Unit 1.1
Unit of measurement
bar
▼
Temperature unit
°C
▼
Position correction 1.2
Oset
=
0.2 mbar
0000 mbar
Min. adjustment 1.3
000.0 %
=
0.0 mbar
0.0 mbar
Max. adjustment 1.4
100.00 %
=
100.00 mbar
0.0 mbar
Damping 1.5
0 s
Linearization curve 1.6
linear
▼
Sensor-TAG 1.7
Sensor
Adjustment system
Kommentare zu diesen Handbüchern