Vega Creative Modem Blaster V.92 External DE5721 Bedienungsanleitung PDF herunterladen (Seite 47)

Troubleshooting B-2

The modem or communications software fails to detect that the remote user has hung up.

The modem or communications software relies on the dial tone, busy tone or silence period to detect that

a remote user has hung up.

This detection may fail due to one of the following reasons:

❑ Your local telephone system does not generate the dial or busy tone when the remote user hangs up.

❑ The silent period for the modem or communications software to detect that the remote user has hung

up is not long enough.

❑ The modem or communications software cannot detect a different dial or busy tone. For example, if

you are connecting to a PABX system, the dial or busy tone generated is different from the usual dial

or busy tone.

To solve this problem:

Prompt the remote user to respond. This may, however, result in a long delay before the communications

software responds to the remote user hanging up. To minimize this delay, modify the following settings:

❑ Voice message recording time.

❑ Number of prompts.

❑ Time to wait for a response after prompting.

Resolving Hardware

Conflicts

Hardware conflicts may occur when two or more peripheral devices are set to use the same I/O address,

IRQ line or DMA channel.

To resolve conflicts in Windows 98SE, Windows 2000, Windows Me or Windows XP, change the resource

settings of your modem or the conflicting peripheral device using Device Manager.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 60 61

Keine Kommentare

Vega Creative Modem Blaster V.92 External DE5721 Bedienungsanleitung Seite 47