VEGACOM 558 Ethernet 27
10001
10002
10003
10004
10005
10006
10007
10008
10009
10010
10011
10238
10239
10240
10012
10013
10014
10015
10016
10017
10018
10019
1 BIT
Register
address
in
Modicon
Input contact 2
VEGAMET
with
DISBUS
address =
1
Addressing of the switching conditions in VEGACOM
558 for VEGAMET 513, 514, 515 or 614
Input contact 1
reserved
reserved
reserved
reserved
reserved
Status: Inputs
Relay contact 1
Relay contact 2
Fail safe relay
reserved
reserved
reserved
reserved
Status: Outputs
Input contact 2
Input contact 1
reserved
VEGAMET
with
DISBUS
address =
2
VEGAMET
with
DISBUS
address =
15
reserved
reserved
Status: Outputs
Status of
inputs
Switching
status of
input
no.:
Status of
outputs
Switching
status of
output no:
Data image in VEGACOM 558
Addressing of the switching conditions
when connected to DISBUS
If you imagine the 16 register bits belonging
to a VEGAMET as one 16 bit word, the
following graphical repesentation results.
The meaning of the individual bits is defined
as follows:
Status of inputs:
0 = all inputs OK
1 = input status not available (no inputs
configured or VEGAMET not available)
Switching status of inputs 1 and 2:
0 = input contact is open
1 = input contact is closed
Status of outputs:
0 = all outputs OK
1 = output status not available (no outputs
configured or VEGAMET not available)
Switching status of outputs 1, 2 and 3 (output
3 corresponds to fail safe relay):
0 = relay is deenergised
1 = relay is energised
Note:
A complete overview of the process images
on the switching status of VEGACOM 558
can be found in supplement B at the end of
this operating instructions manual.
0123
123
456701234567Bit
12
1.
Byte
2.
Byte
Temporary memory in
VEGACOM 558
Kommentare zu diesen Handbüchern