Vega VEGABAR 67 4 … 20 mA_HART Bedienungsanleitung PDF herunterladen (Seite 31)

6 Set up with the display and adjustment module PLICSCOM

VEGABAR 67 • 4 ... 20 mA/HART

36742-EN-130321

6 Set up with the display and adjustment

module PLICSCOM

6.1 Short description

The display and adjustment module is used for measured value

display, adjustment and diagnosis. It can be mounted in the following

housing versions and instruments:

•

All continuously measuring sensors in single as well as double

chamber housing (optionally in the electronics or connection

compartment)

•

External display and adjustment unit

Note:

Youcannddetailedinformationontheadjustmentintheoperating

instructionsmanual"Display and adjustment module".

6.2 Insert display and adjustment module

The display and adjustment module can be inserted into the sensor

and removed again at any time. It is not necessary to interrupt the

power supply.

Proceed as follows:

1. Unscrewthehousingcover

2. Place the display and adjustment module in the desired position

ontheelectronics(youcanchooseanyoneoffourdierentposi-

tions - each displaced by 90°)

3. Press the display and adjustment module onto the electronics

and turn it to the right until it snaps in.

4. Screw housing cover with inspection window tightly back on

Removal is carried out in reverse order.

The display and adjustment module is powered by the sensor, an ad-

ditional connection is not necessary.

Mount/Dismount display

and adjustment module

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Keine Kommentare

Vega VEGABAR 67 4 … 20 mA_HART Bedienungsanleitung Seite 31