Vega VEGABAR 81 HART and accumulator pack - Operating I Bedienungsanleitung PDF herunterladen (Seite 10)

3 Product description

VEGABAR 81 • HART and accumulator pack

45026-EN-131107

Transport must be carried out in due consideration of the notes on the

transport packaging. Nonobservance of these instructions can cause

damage to the device.

The delivery must be checked for completeness and possible transit

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.

Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter "Supplement -

Technical data - Ambient conditions"

•

Relative humidity 20 … 85 %

3.4 Accessories and replacement parts

The display and adjustment module PLICSCOM is used for measured

value indication, adjustment and diagnosis. It can be inserted into the

sensor or the external display and adjustment unit and removed at

any time.

Youcanndfurtherinformationintheoperatinginstructions"Display

and adjustment module PLICSCOM" (Document-ID 27835).

The interface adapter VEGACONNECT enables the connection of

communication-capable instruments to the USB interface of a PC. For

parameter adjustment of these instruments, the adjustment software

PACTware with VEGA-DTM is required.

Youcanndfurtherinformationintheoperatinginstructions"Interface

adapter VEGACONNECT" (Document-ID 32628).

The protective cover protects the sensor housing against soiling and

intense heat from solar radiation.

Youwillndadditionalinformationinthesupplementaryinstructions

manual "Protective cover" (Document-ID 34296).

Screwedangesareavailableindierentversionsaccordingtothe

following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,

JIS B 2210-1984, GOST 12821-80.

Youcanndadditionalinformationinthesupplementaryinstructions

manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID

31088).

Transport

Transport inspection

Storage

Storage and transport

temperature

PLICSCOM

VEGACONNECT

Protective cap

Flanges

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

Vega VEGABAR 81 HART and accumulator pack - Operating I Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Vega VEGABAR 81 HART and accumulator pack - Operating I