Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung PDF herunterladen (Seite 80)

CONFIGURATION

HTTP request will be sent to TCP connection on router port 80 which sends an SMS

message Test to phone number 420712345678. Authorization is in the format

"user:password" coded by BASE64, example is for root:root.

6.32. Backup Configuration

The router configuration is possible to save by help of the Backup Configuration menu

item. After clicking on this menu it is possible to check a destination directory, where it will

save the router configuration.

6.33. Restore Configuration

In case it is needed to restore the router configuration, it is possible in Restore

Configuration menu item to check configuration by help Browse button.

6.34. Update firmware

To view the information about the firmware version and instructions for its update select

the Update Firmware menu item. The new firmware will be checked after pressing Browse

button and update the following pressing the Update button.

After successful firmware updating the following statement is listed:

There is information about updating of the FLASH memory.

By firmware actualization from 1.0.5 version the router configuration is remains include

IP address. By actualization older firmware than 1.0.5 the IP address will be set

on 192.168.1.1 and all values are in defaults state. From firmware version 2.0.3 is provided

simply file name check of new firmware file. Upload firmware of different device can cause

damage of the router! Total update time lasts for 3 - 4 minutes. During updating of the firmware

permanent power supply has to be maintained. We strongly recommend not using distant

update because of blackout GPRS connection.

LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 100 101

Keine Kommentare

Vega LUCOM EDGE router ER75i v2 SL USER’S GUIDE Bedienungsanleitung Seite 80