Vega SOLITRAC 31 4 … 20 mA_HART - four-wire With SIL qu Bedienungsanleitung PDF herunterladen (Seite 32)

7 Set up with the display and adjustment module

SOLITRAC 31 • 4 … 20 mA/HART - four-wire

43387-EN-131119

Otherwise the instrument remains in the released and hence unsafe

condition.

Themainmenuisdividedintovesectionswiththefollowingfunc-

tions:

Setup: Settings, e.g. for measurement loop name, isotope, applica-

tion, background radiation, adjustment, signal output

Display: Settings, for example language, measured value display

Diagnosis: Information, for example, of device status, peak value,

simulation

Additional adjustments: Instrument unit, reset, date/time, copying

function

Info: Instrument name, hardware and software version, date of manu-

facture, instrument features

Check if the correct language is already set for the display. If not, you

can change the language in the menu item "Display/Language".

Start with the setup of SOLITRAC 31.

In the main menu point "Setup", the individual submenu points

should be selected one after the other and provided with the correct

parameters to ensure optimum adjustment of the measurement. The

procedure is described in the following.

Stick with the normal sequence of the menu items as closely as pos-

sible.

Setup

In this menu item you can assign an unambiguous name to the sen-

sor or the measurement loop.

This parameter is described in the operating instructions manual

"Display and adjustment module".

In this menu item you can adjust the SOLITRAC 31 to the integrated

isotope in the source container.

For this purpose, check which isotope is integrated in the source

container.Youcanndthisinformationonthetypelabelofthesource

container.

Main menu

Procedure

Setup - Measurement

loop name

Setup/Isotope

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Keine Kommentare

Vega SOLITRAC 31 4 … 20 mA_HART - four-wire With SIL qu Bedienungsanleitung Seite 32