Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung PDF herunterladen (Seite 66)

221981 2011-07

WHA-GW-*

Operation

6.1.2 Buttons and DIP switches

Figure 6.3Buttons inside the gateway housing

LED flashes A HART or MODBUS message is received by the gateway via the

Ethernet interface. The LED does not flash if the message is not

addressed to the gateway or if a communication error was

detected within the message..

LED off No Ethernet communication at present.

LED indicators

1 Button A

2 Button B

Time pressed Function

Function of button A

> 3 seconds Configuration reset: This button sets all gateway configuration

parameters back to factory settings with exeption of the

parameters set by button B and button A + B.

After 3 seconds, all LEDs light up to confirm the reset.

Function of button B

> 3 seconds Communication reset: This button sets all gateway configuration

parameters related to the wired communication channels back to

factory settings.

After 3 seconds, all LEDs light up to confirm the reset.

Function of button [A + B] (security mode disabled)

> 3 seconds Password reset: When pressed while the Security Mode is

disabled (see Figure 6.4 on page 67), the buttons set the

password used to access the web server (HTTPS password) back

to factory settings. The factory default password for the web server

(HTTPS) is "admin".

After 3 seconds, all LEDs light up to confirm the reset.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 95 96

Keine Kommentare

Vega WHA-GW-WIRELESSHART GATEWAY Bedienungsanleitung Seite 66