Vega INSYS Modem GPRS 5.0 Bedienungsanleitung PDF herunterladen (Seite 23)

INSYS GPRS 5.0 serial Mounting



If your provider requires PAP authentication, select the required field be-

low the GPRS AN input field and enter the PAP user data.

3. Send the values to the INSYS GPRS 5.0 serial.



Use the button "Send values" in the program HSComm GPRS.

4. Perform a restart.



Use the reset key at the front of the device or disconnect the de-

vice from the power supply for a short time.

4.5.8 Establishing a test connection

To establish a test connection to another computer in the Internet, a terminal program

will be required, e.g. TeraTerm. The program is included on the supplied CD, in the folder

software. Alternatively, you may also use other terminal programs. The procedure de-

scribed in this section, however, applies to the program TeraTerm only. This section will

show how to establish a connection from the INSYS GPRS 5.0 serial to the http server of

INSYS, and how to send the contents of a file.

1. Install the program TeraTerm

2. Start TeraTerm.

3. Configure the serial connection.



During the start phase of TeraTerm, you will be asked to configure a new

connection.

4. Select "Serial" for a connection via a serial interface.

5. Select the serial interface, to which you connected the INSYS GPRS 5.0

serial.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 112 113

Keine Kommentare

Vega INSYS Modem GPRS 5.0 Bedienungsanleitung Seite 23