Vega Phoenix PSI Data Fax Modem Bedienungsanleitung PDF herunterladen (Seite 101)

AT Commands

692302 6-13

%G Caller ID

%P Power-On Auto-Connect

The %P command specifies whether the modem automatically establishes a

connection with another modem when it is switched on.

%S Call-Back Security

\F Display all Stored Telephone Numbers

The command displays all 20 stored telephone numbers.

\L Check the Telephone Connection

This command executes a line test.

\S Receive SMS Messages

%G0 Disable the caller ID function.

%G1 Enable caller ID output. The caller ID is output to the RS-232 interface in

a specific format

%G3 Enable caller ID evaluation.

Selective call acceptance: Only calls from the stored caller IDs from &Z18

and &Z19 are accepted, regardless of register S0.

%P0 Configuration of the modem for normal operation (default).

%P1 Enable the auto-connect function. The modem automatically dials

telephone number x which was stored with the &Z0=x command (see

page 4-21).

%S0 Disable call-back security.

%S1 Enable call-back security with password validation.

%S2 Enable password validation.

\S0 Do not receive SMS messages.

\S1 Receive SMS messages. The telephone number for the SMS provider

must be stored under &Z20. SMS messages are output to the RS-232

interface in a specific format.

\S2 Control the modem via SMS Messages (see Section "SMS in the Fixed-

Line Network" on page 5-14).

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 127 128

Keine Kommentare

Vega Phoenix PSI Data Fax Modem Bedienungsanleitung Seite 101