Vega Phoenix PSI Data Fax Modem Bedienungsanleitung PDF herunterladen (Seite 109)

AT Commands

692302 6-21

6.4 S Registers

Your modem has 105 registers (S0 through S104). These registers influence the

operating characteristics of the modem, send your information via your modem, and

enable you to test your modem. The values of certain registers can be modified

using specific commands. If you use a command to modify a register value, this

command remains active until your switch off or reset your modem. Your modem

then reverts back to the operating characteristics stored in its permanent memory.

Reading a Register Value

Use the Sr? command to read the current value of a register:

r = Register number (0 through 104)

Your modem displays a three-digit decimal value for the register.

Modifying a Register Value

Use the Sr=n command to modify the current value of a register:

r = Register number (0 through 104)

n = New value

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 127 128

Keine Kommentare

Vega Phoenix PSI Data Fax Modem Bedienungsanleitung Seite 109